|
Warning
PROVIDE ADEQUATE VENTILATION. USE LATEX
GLOVES WHEN HANDLING COATINGS AND PRIMERS. FOLLOW MANUFACTURES
DIRECTIONS AND AVOID BREATHING VAPORS. IF YOU OR ANYONE IN YOUR HOME HAS
RESPIRATORY HEALTH PROBLEMS OR ASTHMA, DO NOT USE THIS PRODUCT.
EXTINGUISH ALL IGNITION SOURCES. DO NOT SMOKE WHILE USING. FLAMMABLE.
COLOR MATCHES OF YOUR EXISTING TILE MAY NOT BE POSSIBLE. IN THIS
CASE, REFINISH THE ENTIRE TILE.
REPAIRS Must be
completed prior to using this product. Chipped or cracked tiles, missing
grout,
holes or other damage can be repaired by using one of our repair kits.
TOOLS NEEDED 2 Premium
Natural Bristle Brushes or 1/4 to 1/2 Inch Sponge Type Nap Roller, Acetone,
1 Sheet of 100 grit Sand Paper, Pair of Disposable Gloves, Masking Paper, 1
Inch roll of tape.
DIRECTIONS
STEP 1 - PREPARING THE TILES
A. Use products at room temperatures above 60 degrees only. The preparation
of the fixture is the most important step in the refinishing process. Follow
directions completely.
B. Surface must be clean, dry and free from grease or wax. Clean with
an over the counter floor or tile cleaner. Rinse thoroughly and allow to dry
completely. Any paint droppings or other foreign materials can be sanded off
using 100 grit sand paper. Grease and other oil based matter can be removed
with Acetone.
Any caulking or silicone that may be on tiles
will need to be removed completely. The film left behind from these
materials must be completely removed by sanding with 100 grit sandpaper.
STEP 2 – Applying
Primer
Primer - Apply the primer
using a brush or sponge roller. One coat is all that is needed. Allow primer to dry for 24 hours
depending on temperature and humidity.
STEP 3 – Applying The Brush-On Color Coating
A. Mix paint thoroughly. Apply in smooth even coats.
B. When finished be careful not
to get debris on wet coating or coating to get wet with water until dry. Allow to Dry 24-48 hours
depending on temperature and humidity.
Clean Up with paint
thinner or dispose of brushes, rollers and other materials properly. Do not
allow children in the work area.
CARE AND CLEANING
Never clean fixtures with abrasive cleanser, or scrub pads. Do not use
products containing bleach
or allow drain cleaners to come into contact with the finish. Shelf life of product is 1 year. Keep out of reach of
children.
USE THESE PRODUCTS AT YOUR OWN RISK.
The Bathtub Refinishing Referral Network will not be liability for incidental or consequential damages,
arising from the use, or misuse of these products. Any claims regarding
these products must be directed to the manufacturer. Product received
damaged during shipment must be reported to the shipping company within 24 hours of
receipt of damaged goods and the Bathtub Refinishing Referral Network must be
notified at
sales@refinishingonline.com
.
Returns: Any item returned due to damage in shipping or a defective
item, must receive an Identification
tag, prior to shipping the item back to the supplier. Tag is only available by emailing the Bathtub Refinishing
Referral Network at the above email address. We must be contacted within 24
hours of receiving a damaged or defective item. No item will be accepted
without an ID tag. Refunds will include replacement of the damaged or
defective product only and are provided from the manufacturer.
This product is dangerous if misused. The customer or enduser(s) assume
full responsibility for its proper use and application, as outlined in these
installation instructions. Material Safety Data Sheets (MSDS) are available
upon request –contact:
sales@refinishingonline.com .
|
